2016

  • I. Breslavsky, M. Amabili, M. Legrand, Circular cylindrical shell made of Neo-Hookean–Fung hyperelastic material under static and dynamic pressure. Proceeding of the Fifth International Conference in Nonlinear Dynamics, Kharkov, Ukraine, September 27-30, 2016
  • I. Breslavsky, M. Amabili, M. Legrand, and A. Ruimi, Dynamics of statically pre-loaded human aorta, 24th International Congress of Theoretical and Applied Mechanics, Montreal, Canada, August 21-26, 2016
  • A. Thorin, P. Delezoide, and M. Legrand, Nonsmooth modal analysis of piecewise-linear impact systems, 24th International Congress of Theoretical and Applied Mechanics, Montreal, Canada, August 21-26, 2016
    oaihal-01402551
  • Y. Shi and M. Legrand, Semismooth Newton solver for periodically-forced solutions to a unilateral contact formulation, 24th International Congress of Theoretical and Applied Mechanics, Montreal, Canada, August 21-26, 2016
  • D. Urman and M. Legrand Nonlinear modes of vibration of vibro-impact Duffing oscillators, 24th International Congress of Theoretical and Applied Mechanics, Montreal, Canada, August 21-26, 2016
  • A. Thorin and M. Legrand Nonsmooth modal analysis from elementary impact oscillators to turbomachines: limitations and avenues, 16th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery, Honolulu, USA, April 10-15, 2016
    oaihal-01401772
  • I. Breslavsky, M. Amabili, and M. Legrand, Aortic segment under pressure load, 12th World Congress on Computational Mechanics, Seoul, Republic of Korea, July 24-29, 2016
  • A. Batailly, M. Legrand, and C. Pierre, Full 3D rotor/stator interaction simulations in aircraft engines with time dependent angular speed, ASME Turbo Expo 2016, GT2016-56715, Seoul, Republic of Korea, June 13-17, 2016
    oaihal-01388425
  • C. Yoong, A. Thorin, and M. Legrand, Nonsmooth modal analysis for a one-dimensional finite bar subject to unilateral contact using the Wave Finite Element Method, The Fourth Joint International Conference on Multibody Systems Dynamics (IMSD 2016), Montreal, Canada, May 29-June 2, 2016
    oaihal-01408111

2015

  • I. Breslavsky, M. Amabili, and M. Legrand, Statics and dynamics of circular cylindrical shell made of arterial material, 9th European Solid Mechanics Conference, Madrid, Spain, July 6-10, 2015
  • A. Thorin, M. Legrand, and S. Junca, Nonsmooth Modal Analysis: Investigation of a 2-dof spring-mass system subject to an elastic impact law, Proceedings of the ASME IDETC/CIE Conference, Boston, USA, August 2-5, 2015
    oaihal-01185973
  • C. Yoong, A. Thorin, and M. Legrand, The Wave Finite Element Method applied to a one-dimensional linear elastodynamic problem with unilateral constraints, Proceedings of the ASME IDETC/CIE, Boston, USA, August 2-5, 2015
    oaihal-01194922
  • A. Millecamps, A. Batailly, M. Legrand, and F. Garcin, Snecma's viewpoint on the numerical and experimental simulation of blade-tip/casing unilateral contacts, Proceedings of the ASME Turbo Expo, Montréal, Canada, 2015
    oaihal-01223582
  • B. Berthoul, A. Batailly, M. Legrand, L. Stainier, and P. Cartraud, Abradable coating removal in turbomachines: a macroscopic approach accounting for several wear mechanisms, Proceedings of the ASME Turbo Expo, Montréal, Canada, 2015
    oaihal-01188846

2014

  • S. Jones and M. Legrand, Vibration of an axial bar experiencing periodic unilateral contact using the Wavelet Balance Method, Proceedings of the ASME IDETC/CIE Conference, Buffalo, New York, August 17-20, 2014
    oaihal-01403614
  • I. Breslavsky, M. Legrand, and M. Amabili, Vibration of a square hyperelastic plate around statically pre-loaded state, Proceedings of the ASME IDETC/CIE Conference, Buffalo, New York, August 17-20, 2014
    oaihal-01195752
  • M. Legrand and S. Junca, Nonlinear modes of a discrete mechanical system with rigid contact, Abstracts of the XIth World Congress on Computational Mechanics, Barcelona, Spain, July 20-25, 2014
  • I. Breslavsky, M. Legrand, and M. Amabili, Static and dynamic bending of rectangular sheet of biomaterial, Abstracts of the XIth World Congress on Computational Mechanics, Barcelona, Spain, July 20-25, 2014
  • N. Salvat, A. Batailly, and M. Legrand, Two-dimensional modeling of shaft precessional motions induced by blade/casing unilateral contact in aircraft engines, Proceedings of the ASME Turbo Expo, Düsseldorf, Germany, 2014
    oaihal-01090671
  • A. Batailly, M. Legrand, A. Millecamps, and F. Garcin, High-pressure compressor blade dynamics under aerodynamic and unilateral contact forcings, Proceedings of the ASME Turbo Expo, Düsseldorf, Germany, 2014
    oaihal-01130542
  • A. Batailly and M. Legrand, Conjectural bifurcation analysis of an aircraft engine blade undergoing 3D unilateral contact constraints, Proceedings of the ASME Turbo Expo, Düsseldorf, Germany, 2014
    oaihal-01183448
  • A. Batailly, M. Legrand, A. Millecamps, S. Cochon, and F. Garcin, Redesign of a high-pressure compressor blade accounting for nonlinear structural interactions, Proceedings of the ASME Turbo Expo, Düsseldorf, Germany, 2014
    oaihal-01120158

2013

  • I. Breslavsky, M. Amabili, and M. Legrand, Static and dynamic analysis of hyperelastic plates, Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics, 2013, Montréal, Québec
  • M. Meingast and M. Legrand, LCP formulation for solving forced periodic unilateral contact problems, Proceedings of the 4th Canadian Conference on Nonlinear Solid Mechanics, 2013, Montréal, Québec
  • M. Meingast, A. Batailly, M. Legrand, and C. Pierre, Rotor/stator interaction within a helicopter engine, Proceedings of the Nonlinear Dynamics in Engineering: Modelling, Analysis and Applications conference, Aberdeen, Scotland
  • M. Meingast, A. Batailly, M. Legrand, and J-P. Ousty, A qualitative numerical analysis of rotor-casing interactions in the centrifugal compressor of a helicopter engine, Proceedings of the ASME IDETC/CIE conference, 2013, Portland, USA
    oaihal-00851397
  • A. Batailly, M. Meingast, M. Legrand, and J-P. Ousty, Rotor-stator interaction scenarios for the centrifugal compressor of a helicopter engine, Proceedings of the ASME IDETC/CIE conference, 2013, Portland, USA
    oaihal-00851396
  • N. Salvat, A. Batailly, and M. Legrand, Modélisation de l'enlèvement de matériau abradable à l'aide d'équations différentielles à retard, Proceedings of the 11th national colloquium in structural analysis, 2013, Giens, France
    oaihal-01104675
  • T. Butlin and A. Batailly, Anti-optimisation applied to the analysis of rotor/stator interaction, Proceedings of the ASME Turbo Expo, 2013, San Antonio, USA
    oaihal-00833414
  • M. Meingast, A. Batailly, M. Legrand, and J-P. Ousty, Investigation of rotor-casing interactions in the centrifugal compressor of a helicopter engine, Proceedings of the ASME Turbo Expo, 2013, San Antonio, USA
  • N. Salvat, A. Batailly, and M. Legrand, Modeling of abradable coating removal in aircraft engines through delay differential equations, Proceedings of the ASME Turbo Expo, 2013, San Antonio, USA
    oaihal-00879815

2012

  • I. Breslavsky, M. Amabili, and M. Legrand, Physically and geometrically nonlinear vibrations of thin rectangular plates, Proceedings of the 8th European Solid Mechanics Conference (Euromech), 9-13 July 2012, Graz, Austria.
  • S. Jones and M. Legrand, The wavelet-Galerkin method for solving PDE's with spatially dependent variables, Proceedings of the 19th International Congress on Sound and Vibration, 8-12 July 2012, Vilnius, Lithuania
    oaihal-00719744
  • A. Batailly, M. Legrand, A. Millecamps, and F. Garcin, Numerical study of a rotor/stator interaction case experimentally simulated with an industrial compressor, Proceedings of the ASME Turbo Expo, 11-15 June 2012, Copenhagen, Denmark
    oaihal-00714538
  • A. Batailly, M. Cuny, and M. Legrand, Numerical simulation of tool/abradable material interaction experiments,Proceedings of the ASME Turbo Expo, 11-15 June 2012, Copenhagen, Denmark
    oaihal-00841147

2011

  • A. Batailly, M. Legrand, and C. Pierre, Influence of abradable coating wear mechanical properties on rotor stator interaction, Proceedings of the ASME Turbo Expo, 6-10 June 2011, Vancouver, Canada
    oaihal-00616524
  • M. Legrand and D. Laxalde, Performance of time-marching techniques dedicated to nonsmooth systems: a nonlinear modal analysis approach, Euromech Colloquium 516 - Nonsmooth contact and impact laws in mechanics, 6-8 July 2011, Grenoble, France
    oaihal-00719781

2010

  • B. Magnain, A. Batailly, N. Chevaugeon, M. Legrand, and C. Pierre, Comparative study of the use of C1-continuous finite elements and splines for contact problems with large slidings, IVth European Conference on Computational Mechanics (ECCM), 16-21 May 2010, Paris, France
    oaihal-00657382
  • M. Legrand, A. Batailly, and C. Pierre, Numerical investigation of abradable coating removal through plastic constitutive law - Application to aircraft engines, IUTAM Symposium, 30 July 2010, Aberdeen, Scotland.
  • A. Batailly, B. Magnain, M. Legrand, and C. Pierre, Validation of a 3D contact algorithm for the study of blade-tip/casing contacts in turbomachines, Proceedings of the 8th IFToMM Conference on Rotordynamics, 12-15 September 2010, Seoul, Korea
    oaihal-00533382
  • J. Wu, M. Legrand, and C. Pierre, Non-synchronous vibration of a Jeffcott rotor due to internal radial clearance in roller bearings, Proceedings of the 8th IFToMM Conference on Rotordynamics, 12-15 September 2010, Seoul, Korea
    oaihal-00533285

2009

  • A. Batailly, M. Legrand, P. Cartraud, C. Pierre, and J.-P. Lombard, Evaluation of component mode synthesis methods for the detection of modal interaction through rotor stator contacts, Proceedings of the ASME IDETC/CIE, August 30 - September 2, 2009, San Diego, USA
    oaihal-00714528
  • M. Legrand and C. Pierre, Numerical investigation of abradable coating wear through plastic constitutive law: application to aircraft engines, Proceedings of the ASME IDETC/CIE, August 30 - September 2, 2009, San Diego, USA
    oaihal-00413728
  • D. Laxalde, M. Legrand, and C. Pierre, Nonlinear modal analysis of mechanical systems with frictionless contact interfaces, Proceedings of the ASME IDETC/CIE, August 30 - September 2, 2009, San Diego, USA
    oaihal-00413696
  • A. Batailly, M. Legrand, P. Cartraud, and C. Pierre, Evaluation d'une méthode de réaction modale pour la détection de cas d'interaction modale lors de contacts rotor stator, Congrès Français de Mécanique, 2009, Marseille, France
    oaihal-00413704
  • D. Laxalde, M. Legrand, and C. Pierre, Modes non-linéaires appliqués aux problèmes de contact: application à une aube de turbomachine, Actes du 9e colloque national en calcul des structures, May 25-29 2009, Giens, France
    oaihal-00390124
  • M. Legrand and C. Pierre, Modélisation plastique bi-linéaire de l'usure de matériaux abradables: application aux turbo-machines, Actes du 9e colloque national en calcul des structures, May 25-29 2009, Giens, France
    oaihal-00390869